The Turkey Board Lives!

I just finished laminating my baord, installing fin plugs, and I hotcoated the deck. Now all thats left is hotcoat bottom and sand. then It will be done. I say it lives because It survived my first time at fiberglassing. If you’re wondering “what the hell is turkey board?” look at this post: “Lam Resin v.s. sanding resin”;sb=post_latest_reply;so=ASC;forum_view=forum_view_collapsed;;page=unread#unread

and also: “Mahalo to all who helped”

good on ya Scott , I’m stoked for ya !

(I always enjoy a “pictures of my first board” type thread …)


Ill post final pics (post sanding, tonight or tomorrow morning). Man, grinding the rails was a B1tch. really hard to get them to lay flat and smooth, not to mention, resin drip dried forming little bubbles on the underside. But i managed to grind them down too.