i put too litle catylist in a 14 oz batch of resin it is still dripping after 20 mins what should i do
it is normal resin (ding all )
i need help anything would be appreciated
surfkid,
Go surfing and check it tommorrow. Mike
there are no waves and it is almost dark
Surfkid,
If its a lamination and the board is already glassed mix up a hot batch and work it in overtop of the old lam. Make sure you work it in. This will help it go off eventually.
If it is a hotcoat use a squeegee to remove as much of the resin as possible then mix up a new batch with a little extra catylast and shoot a new coat.
You might be okay, depending on how much catayst was used, just bring it into the warmest room you have and leave it overnight.
Austin
i was fixing a snapped longboard the resin has stopped drippind and is now like jello
Surfkid,
Put it in the hottest room you have and wait. If its jelling it is kicking. Check tomorrow and if it isn’t hard you are going to have to dig it out and start over.
Austin