i want to shape a fish-like board borrowing as much as possible from the original Lis design except with a slightly pulled in round/thumb tail. kinda Rawson_impala, kinda firewire_dominator, etc. strictly under headhigh grovel shape... i'm having trouble deciphering the rocker #'s in the Surfboard_Design_And_Construction book on page 63... any help with rocker is appreciated... seems like in the book they put a flat edge on the tail and measured that as 0 and then measured rocker all the way to the nose. is that right? if i were to measure the rocker more traditionally, that would equate to like??? 2 3/4" nose and 1/2" tail maybe?
Check your PM mate
If thats the case about the rocker measurments, there is no reason why you couldnt grab Shape3d, plug in the numbers and adjust the lay of the board to get the correct #'s.
mmm just punch in the numbers, why not!
The numbers I saw for a 5-5 Lis were 3.25" in the nose and dead flat in the tail. Some of the Mini-Simms are doing similar.