Has anyone used uv cure resin with color jobs as far as either airbrush color on blank or resin tint. Im using surfsource uv resin. I didn’t know if there would be a problem with the resin not curing all the way though with the color
If you opague the resin too much it won’t cure all the way thru…at least for a very,very long time…other than that no real problems.
so long as the tint is light enough that you can still see the stringer behind it, it will cure. just the same, it’s not a bad idea to add a bit of MEKP.
In a single layer laminate you might be surprised what you can get away with if you put the board in direct sunlight. When mixed in an abstract, I’ve had some solid black opaque and other colors go off fine. This paipo was done with UV polyester… I don’t think you can see the stringer. Test to be sure.
how much mekp would you add to a 83 oz bucket of uv resin