Yes. Pembroke Welsh Corgi. Housebroken. But he did pee on a bag of 40 minute drywall mud in the shop the other day. Bad dog Miki. He likes the cooler climes of the Northwest. Travels well and never talks back.
[img_assist|nid=1068446|title=Noserider Fin|desc=|link=none|align=left|width=640|height=480]
[img_assist|nid=1068447|title=Handplane|desc=|link=none|align=left|width=640|height=360]
I know its not boards as such but ive no money for foam at the moment so im occupying myself in other ways. Lol and now i realise why fins are so expensive
carbon railed 2# eps bamboo deck kite surfboard
curious to what your thoughts are on 4oz innegra s cloth on the bottom of the board behind a layer of 4 oz s glass.
Just finished shaping a 6’8"x21"x2 3/4" round pin. Left some thickness for the bigger fellas. Went with a bright color look for the artwork. Just need to glass and sand it now to finish it off.
cool spray job
Well… I´ve been riding this board and it´s aproved!
the only change I´ve made is the widest point on the nose is 18" and not the marked on the plan!
enjoy it !
When I posted the file isn´t attached; for those who want this file board, send me a PM; the photo of the board already made is som posts before.
Just finished a 6’2’’ stubby with a quad set-up, green resin tint top and bottom. Photos were taken before glossing and polishing. it looked even better once shiny, but the owner flew away with it as soon as it was done,
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Nice board Balsa. I made another board similar with a green tint red pin stripe but with a round pin. I like that diamond tail on that shape. Might have to use your idea on my next retro.
new board for summer.
trying a different mix layered eps and xps
will do a build thread here if anyone interested.
[img_assist|nid=1068537|title=XPS over EPS chub 5'5" shaped blank|desc=|link=none|align=left|width=640|height=480]
yeah foamhack, i’m interested. i’ve done a few XPS/EPS blanks, although it looks like i go about it a bit differently than you. i thickness the EPS core from 2" sheet with a hotwire. the top and bottom XPS sheets are bagged over in the rocker jig with PU glue. you only see EPS at the rail, and these get bagged with corecork anyway, so you’ll never see.
i’d love to see a build thread. bring it on.
-cbg
here’ a couple
[img_assist|nid=1068556|title=first 2|desc=|link=none|align=left|width=75|height=100]
[img_assist|nid=1068555|title=gypsy|desc=|link=none|align=left|width=75|height=100]
Did this one a little different. Used a full laminate, weeded it out and this is what we got
Well there is a string of some of what I’ve done this year. I’m hooked. 9 boards down hopefully hundreds to go.
This one got a Labor day paint job and is headed to the glasser. It’s 6’ 2’’ x 23’’ x 2 3/4’'. It’s getting ProBox quads and is my first Simmons-ish board. Very excited to try this one out. Fun to shape and thanks to some sage advice from savvy Swaylockians, fun to resize to it’s present state. 
Looking good.
What? Are you crazy? Build threads here? Try Surfer Mag. No wait. I have that backwards.
But you are crazy. Post the build pics. It is why we are here.
All the best.