what is a good bottom contour for a fish?

im wanting to build a fish for the summer surf that rarely gets over 4 feet. what is a good outline and bottom contour? thickness, wide point, rails, wings? i have no idea. i cant drive down to my local surf shop and look for myself. i read as much as can but still i need some help. thanks

GLS- 1.go to the “Board” archives, start in the 5’- 5’11" category and move up. Herb Spitzer has posted a ton of good information and pictures on this site. 2.www.surfenginez.com Steve Brom is the Wizard and if you want to ride the bus you got to pay. His shapes have been there since the beginning and they are time tested. 3.you are going to end up with a flat board from 6’0"-7’0", 3" thick +/-, wide point forward, rails are classified but once you get the outline and the foil figured out the rails will come to you in time, specific to your conditions 4.don’t even think about 3 fins TS>>> im wanting to build a fish for the summer surf that rarely gets over 4 > feet. what is a good outline and bottom contour? thickness, wide point, > rails, wings? i have no idea. i cant drive down to my local surf shop and > look for myself. i read as much as can but still i need some help. thanks