What should I do with this stuff? Anyone have any ideas?
sound insulation around your shop vac or compressor
Cut slices, sandwich with pvc, vac on a skin, dont forget to stage the perimeter stringer. Tailored flex for your needs.
Looks like a short and curly to me. Just throw it away and proceed to your foam.
dane
that stuff looks pretty week
recycle it
Looks like fin blanks to me. Practice your foiling. If you end up with something good, bag on 4-5 layers of s cloth or a 4oz-carbon-4oz sandwich to each side, glass it on, and go surfin’
I’ve done it before. Got a TV from my wife for Xmas a few years ago. Boy was she pissed when I was more excited to go out to the garage & sand on the packaging than I was to set it up. but with 4-cf-4 on each side, and then full patches for glassing it on, it was plenty stiff and very, very light.
Gotta have vac to keep the shape, though.
Hey dane,
Im going thru making a longboard skater at the mo, you culd use that eps as the core and make quite a few if you have a vac pump. Check out this link if you interested…
http://www.instructables.com/id/Composite-sandwich-skateboard/
seeya
Personal consumption is your best bet, A bit of hot sauce and some salt go a long way. And there is enough for the whole family.