same size walker is less than high end styro…
I make my own 2# EPS blanks for UNDER $10 stringerless, about double that with a stringer.
This of course doesn’t take into account the cost of my hotwire setup…just the cost of raw materials. My hotwire cost about $50 bucks to make. Plus an additional $8 for some masonite to make rocker templates.
The answer, if you are looking to save money, is to do it yourself.
If you are depending on someone else for blanks, you pay what they ask, or you go home with no blank.
The other thing that you must take into account, is beside the fact that there is the cost of raw materials, tooling, and labor factored in, you are also paying for the design of the rocker.
I design all of my own rockers, and I have hours put into designing and perfecting, and updating my rockers. They are worth more to me than any amount of money.
Basically, if I were you, I would make my own. It is not as hard as it seems, and you get to have complete control over your designs, from the rocker up!
Quote:
same size walker is less than high end styro…
220,
you keep avoiding. post the great prices.
PU blanks:
6’1 - $62
6’5 - $65
7’11" - $85
that doesnt sound outrageous to me…FH is all im gunna say.