anyone using this? seems very very convenient for those without dedicated sanding rooms.
I use them in my constuction business. I’m assuming your planning on using them indoors such as a garage.They work fairly well. A few points though. I just bought a new 6-pack & the springs (that push the pad into the ceiling) dont seem as strong as the old models from a few years ago(i have both). Also, dont expect the plastic sheeting to be drum tight. The springs aren’t strong enough to keep the top from sliding around & you cant bump the plastic sheeting at all or the poles will move around. I also recomend that you use at least 4 mil (preferably 6 mil) sheeting or the plastic will tear easily. I also recomend that you masking tape the plastic sheeting to the ceiling along the entire length (use the good blue stuff from scotch). You might also tape the bottom as well or foam dust will blow under it when your running any power tools.
They set up & take down fairly quickly. Just keep in mind that you won’t have an airtight room, but it will hold most in.
excellent! thanks for the advice.
all the best